This idea describes a white- LED (WLED) driver circuit controlled by a simple ambient light sensor (ALS). A typical application would be a brightness control for cell-phone backlighting. On a very sunny day, the brightness will increase to improve the visibility.
The circuit uses the IA2505 four-channel WLED (Fig. 1). Each LED can be driven up to 20 mA, with the drive current determined by the current sourced through the resistor (RSET) pin. RSET is a constant voltage source set at 1.2 V.
A resistor between the RSET pin and GND would set a fixed current equally distributed through the four WLEDs irrespective of the ambient light conditions. However, because ambient light isn’t constant in the real world, replacing the RSET with the ALS gives you automatic brightness control.
The ALS, which is basically a pseudo logarithmic amplifier, employs an operational amplifier (IC2) and a signal diode (D3). A log amp is used because of the large dynamic range of photo current. The circuit is designed for 1µ A to 1 mA (60 dB) of photo current. The photodiode, an infrared PIN photodiode, operates in reverse-bias mode as shown. All ambient light sources (fluorescent or incandescent bulbs and sunlight) have a significant amount of IR light. Ideally, a photodiode sensitive to visible light would be the best option.
The bias pot (R3) varies the sensitivity of the ALS depending on the ambient light available and respective photo-current range. For maximum brightness (80 mA total), RSET should source 66 A through the transistor (T1). The RSET source current is mirrored with a gain of 1200 internally by the IA2505 to drive the four LEDs. The table can be used as a guide for setting R3.
Figure 2 shows the transfer function between the photo current and RSET source current for an expected photo current range (R3 = 45 kΩ and R3 = 2 kΩ ).
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Email Newsletter
Sponsored By:
Electronic Design UPDATE provides readers with late-breaking news, opinions from industry experts, and timely technology stories. It's a unique opportunity to get your product message in front of engineers, engineering managers, and corporate managers while they're reading about critical information online.
Reprints
