Dear Sir,

I am doing my final year project on RFID. My project aim is to improve the read distance of RFID tag (active tag). Kindly send me the circuit diagram and block diagrams.

sir , i m a final year (engg.) student with electronics and comm. and wish to make a project based 0n rfid application .sir plz send me the circuit block diagram and the way by which i can make a rfid based attendence list

hello sir . i m a final year be student n want to do a rfid based project .can u give me information on passive tag n reader. i also wanted 2 know whether a tag can work without anntena.

Hello, i am doing my final year project on RFID door security system. Can i have circuit diagram for RFID interfacing with microcontroller 68HC11A1?

sir, I was planning a project named library management using RFID for my final year in ELX engg.It wud be great if i can get circuit diagram,programming part and some notes as soon as possible.Thanks a lot

Sir,

I am doing my final year project on RFID Active tag. Basically my project is to improve the read distance of the tag. Right now i am looking t=for the circuit diagram of Active tag. Could you please help me in this? Thanks in advance

i have to design a security system with rfid tad of frequency 134.2khz i am facing a problem in designing a antenna for that frequncy pls send me reply for this query at blue_key_kitty@yahoo.com

hello sir, I am doing my M.tech project on RFID can u please send me the block diagram and internal architecture and operation of RFID baseband processor?

it is very good website for ee-projects

HI IM DOING PROIJECT ON AUTOMATIC LIBRARY SO PLS SEND ALL CICUIT DIAGRAM OF RF ID

hi, can sent me the RFID Based Attendance System(AT89S52 + RFID)? i want the system block diagram and also the system operation flow chart? thank you!

hello sir,we are doing a project using PIC microcontroller which wud be an automated vehicle identification system. We have to interface RFID tags with PIC muc. I want the circuit diagram for that.And any suggetions on which partcular muc shuld be used.Awaiting a reply frm u.Thank you

Does anybody reply to these posts or we just keep commenting???

i am working on rfid .pls send more infomation

Dear sir...We are doing a final year Btech project on RFID proximity security system and we need the hex code for PIC 16F84 as soon as possible.Please send me the hex code to my mail id vishal_dash1@yahoo.co.in

i want to do barcode reader project pls send block diagram, cost details , circuit diagram, components deitails.....

Pls send me design electronic and Schematic Ckt for make a RFID reader.

Rating Only

what is the reading range of this reader? distance that it can read the tag/transponder..

plz send me block diagram of rf-id based attendance system as soon as possible

HI, I AM DOING MY PROJECT IN AUTOMATIC LIBRARY MANAGEMENT BY USING RFID TECHNOLOGY SO THAT ONE I WANT THE DETAILS OF ALL ABOUT THE READER WHICH HOW LONG ACCESED AND TRANSFERS THE INFORMATION BY COUNTING THE TAG.

Rating Only

hi,

I am doing an RFID door access control device as well, the specifications of which are as follows: 1. Read RFID tags... 2.Display information about the holder of the card (name,date,time of entry,).... 3.Frequency range of tag should be 125 KHz. 4.Capable of storing and displaying 250 employee names.... 5. Capable of storing flexible backup .

There must be an LED circuit showing whether the card is valid, whether the device is ready to accept the card. There must be an option of adding new coding to the controller to be used. Extension of memory should be possible. We need a circuit that contains 8051 microcontroller.

waiting for ur reply. send it to me as soon as posible......

hi,

I am doing an RFID door access control device as well, the specifications of which are as follows: 1. Read RFID tags... 2.Display information about the holder of the card (name,date,time of entry,).... 3.Frequency range of tag should be 125 KHz. 4.Capable of storing and displaying 250 employee names.... 5. Capable of storing flexible backup .

There must be an LED circuit showing whether the card is valid, whether the device is ready to accept the card. There must be an option of adding new coding to the controller to be used. Extension of memory should be possible. We need a circuit that contains 8051 microcontroller.

waiting for ur reply. send it to me as soon as posible......

hai sir, i am doing a project for my tech project with an 13.56Mhz Mifire reader which has to send an serialnumber in to the PIC microcotroller and the PIC must caluculate the corresponding price of the item in the cart and caluculate the total price and display it.I have written a code for it which is causing some problems on the ccs compiler in PIC c code.I request u to help me regarding this project .please help me out. thank u reply me:sudhakar_mareddy@yahoo.com

Dear Sir, we are going to read the RFID tage data(Module "RFID" OEM "UM005") by means of microcontroler C8051F020-silicon labratories and save the data in the flash memory of the µc.would you mind sending the programmation in C only for read the data and save in the flash memory of µc for me? Thanks, Best regards, Kian

pls send me the block diagram,complete circuit diagram of rfid tag reader unit with list of components that are avaliable in indian market.as i wanted to make an rfid tag reader.guidance will be a great help for me.thank you.my email id is dev_911@yahoo.com

hi,i m want 2 do my final yr. project on RFID based attendance can anyone help me with explanation,full circuits.

Hi, I'm doing my final year B.Tech project working on RFID system to identify persons entering a lab. I've already designed the hardware where my reader receives the fsk modulated data from the tag and demodulates it with high bit time period as 120us and low bit of 130us. I shall be very thankful if you provide me with the microcontroller code to display the obtained signal in the LCD. Thanq in advance.

hi, i want to generate 125khz carrier signal for rf reader.... can i do that using pic18f452????how?? or i need to use extra counter??

i am a final year student doing project on rfid based library books maintenance. can you give me design details of reader and where are the tags availabel.

i found the site to be greatly helpfull. i am a final year student and i am doing my project in RFID BASED ATTENDANCE MAINTANANCE. can you give us the design details and also suggest what innovation can be done in this project .i.e. i want to differentiate my project from the present technology , i want to make some advancement.

Has anyone come across of a passive RFID tag with an added LED that light up almost continuously while in the reader field?

Thanks in advance.

we are doing a project in b.e. final year. we want to do r.f.i.d. for staff attendance please provide whole circuit diagram of r.f.i.d. reader, tags with anticollison system

well in a beginer level of pic16f84 and my project is to make a traffic signal using pic plz help me on my email abdullahrafe@hotmail.com

I need to read the RFID tag only once, i e if i read the RFID tag within the antenna range for one time_out then the same RFID tag should not be read for another time_out till that tag goes out of the range...

I am doing project on micro control based remote control using radio freqency signal. will u send me circuit diagram of the same.its very urgent.

please i would like to recieve additional information on the rfid tagging system as icurrently working on my final year project.

I wish to do my project on RF ID based attendance register.I need to know about the component details, circuits, block diagrams, working principle etc.Mail me the details to john_8386@yahoo.com.

Iam working in engineering field.I wish to do my project on RF ID based attndance register.Can you give me more details related to circuit , block diagrams, working etc. Mail me to : jasminrubys@gmail.com

This is really Fascinating..I need to know the components u have used in the achieving the anti Collision technology for RFID tags using FSK technique and also the Hex code for PIC-16F84 8-bit flash Microcontroller. I like to do this practically and study the anticollision technique for RFID tags. I need Ur reply as soon as possible

sir we have projects on rfid based attendance project please give me guidlines on it.the device is an RF ID unit. the specs are as follows. the unit must perform the following functionalists 1. read\write RF ID tags. 2.display information about the holder of the card (name,date,time of entry,) 3.frequency range of tag should be 125 KHz 4.there must be connection of RS232 and RS485 5.capable of storing and displaying 500 employee names, 6. capable of storing 5000 transactions . LCD should be a 2 line LCD. a five key interface to select from a menu in the LCD(the keys must be up,down,left right and select) two outputs capable of driving 12v relays there must be three LEDs showing whether the card is valid,whether the device is ready to accept the card,power . there must be an option of adding new coding to the controller to be used. extension of memory should be possible. we need an entire circuit that should contains PIC 16F84A, adc,dac,lcd,antenna, and noise filtering circuits.

I am working on FYP regarding RF ID and want informations about RF id reader and tags implementation.Plz send me as early as possible with a fine solution.

I am working on FYP regarding RF ID and want informations about RF id reader and tags implementation.Plz send me as early as possible with a fine solution.

I want to know that whether this circuit work.

i am in engineering final doing a RFID(write) door access control device . the device is an RF ID unit. the specs are as follows. the unit must perform the following functionalists 1. read\write RF ID tags. 2.display information about the holder of the card (name,date,time of entry,) 3.frequency range of tag should be 125 KHz 4.there must be connection of RS232 5.capable of storing and displaying 500 employee names, 6. capable of storing a week's backup . LCD should be a 2 line LCD. a 16 key keyboard interface . there must be LED circuit showing whether the card is valid,whether the device is ready to accept the card,power . there must be an option of adding new coding to the controller to be used. extension of memory should be possible.

All those interested in doing RFID, Barcode or Biometrics Sensor based projects can contact me on following address ratnanabh@rediffmail.com

hai, i am in BE final year.i am doing a project on rfid.i have to design a basic rfid reader which can identify exactly two passive tags.can any one of u please provide the circuit diagram for rfid reader. thank you

i would be very grateful to u if u could provide me the complete circuit diagrams of rifd tag, reader n the designing required to make a fully operational rfid system, as i'm doin a project in this respect(tracking plus data capabilities).

dear sir,i am doing a final year project.It involves locating pateints,ward boys and doctors in a hospital using RFID tags and readers.I need the design part of the reader.I need it urgently.Please mail it to me it's bery urgent.thnks a lot

hello!this is very good!I want to ask what the distance from reader to tag?

Hi,

Can i have circuit diagram for RFID interfacing with microcontroller 8051?

I am at banglore. Can you tell me the resources for parts for this project? You can send your comments on sureshluhana@hotmail.com

Regards,

Suresh

hi i am doing my masters in RFID, I was wondering if u could give me some ideas on a good topic for my reaserch in Access control using RFID, my email id is rengithbaby@rediffmail.com

hi i am doing my masters in RFID, I was wondering if u could give me some ideas on a good topic for my reaserch in Access control using RFID

sir i m final year student i want to do my projects on rfid based attendance project please give me guidlines on it

kh_safi2000@yahoo.com

LOL...i am also doing a project, get this book.---

Finkenzeller, K 2003, RFID Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification, John Wiley & Sons Ltd., England.

It will be great help in ur projects...best of luck. I did my project for Msc. CS and built a infant tracking system for shopping malls. This book, plus articles from ACM and IEEE were good help. And theres no substitute for hard work.

I am doing an RFID door access control device as well, the specifications of which are as follows: 1. Read RFID tags. 2.Display information about the holder of the card (name,date,time of entry,). 3.Frequency range of tag should be 125 KHz. 4.Capable of storing and displaying 250 employee names. 5. Capable of storing flexible backup . There must be an LED circuit showing whether the card is valid, whether the device is ready to accept the card. There must be an option of adding new coding to the controller to be used. Extension of memory should be possible. We need a circuit that contains 8051 microcontroller.

Eagerly awaiting for ur reply.

hello sir i am final year student doing project on RFID Based Access Control Systems .can u provide me the Block diagram which consists of RS232 ,Reader ,Tags, Microcontroller(LPC2196) and Host as soon as possible.

i am doing an project to study about how to reduce the collision in RFID reader. i need more about your opinion and detail that can help me to know more about the way to reduce and detect the collision of RFID reader. thanks

Hello I am Navaneet. I needed a circuit diagram for a low cost RFID READER for my final year project. Please help me in this direction.

Thanks & Regards Navaneet

i am doing a RFID door access control device . the device is an RF ID unit. the specs are as follows. the unit must perform the following functionalists 1. read\write RF ID tags. 2.display information about the holder of the card (name,date,time of entry,) 3.frequency range of tag should be 125 KHz 4.there must be connection of RS232 5.capable of storing and displaying 500 employee names, 6. capable of storing a week's backup . LCD should be a 2 line LCD. a 16 key keyboard interface . there must be LED circuit showing whether the card is valid,whether the device is ready to accept the card,power . there must be an option of adding new coding to the controller to be used. extension of memory should be possible. we need an entire circuit that contains Toshiba microcontroller with all interfaces in built.

awaiting for ur reply

I am a final year student and i am doind RFID based attendance syatem project. I want the complete description of RFID tag and reader. I am totally confused in its concept.I dont want the basic cocept. I want in depth explanation.

Sir, 1.We had RFID Reader and Tag working for 30cm at 125KHz frequency.Same thing if I have to extend for 2 meters what I have to add.As per my knowledge we have to change Antenna(with high gain),Reader power and Reader sensitivity. 2.If you have seperate Antennas ,Amplifiers and LNAs,kindly send quotation. 3.Kindly give me advices and clarifications immediately.

Anybody can get me the basic block diagram of RFID system as i am doing a project based on that.

i am in final year and im doing my project in rfid based access control systems. would any one tell actual concept and its block diagram with explanation.

i m doing a project on rfid ,a high level security system to a members only area using active rf id system.i would like to get the transmitter reciever circuit diagram thank you

sir, i am a student i want to do the final year project on RFID where can i get a receiver kit with 4-tags,with low cost..

im murali of final year want to do project on RFID AND PROVIDING ADVANCED SECUIRTY FOR AVOIDING READER COLLISION PROGRAM want some help in building tags and antenna like circuits diagrama and the related components and there place of availability in hyderabad

respected madam,i am doing my project on cfsk.but i don'nt know the difference between frequencf shift keying and cfsk.please tell me if u can

dear sir/madam, we are doing project on RFID based access control system and i require the block diagram and technical specifications regarding this project.

Hi , I am doing my project report based on RFID access control and was looking at networking this system.Can anybody suggest a nework with its advantages. Thank you.

Sir my projects is RFID card system then the block diagram,circuit diagram and then notes are wanted

I want RFID S6420 reader driver in linux envoronment which i am doing library automation in Java using RFID Reader S6420 and passive tags. If possible plz mail me the driver link at my mail id or tell me the way to write the driver.

My mail ID is adinath.j@rediffmail.com

I want RFID S6420 reader driver in linux envoronment which i am doing library automation in Java using RFID Reader S6420 and passive tags. If possible plz mail me the driver link at my mail id or tell me the way to write the driver.

can u please send me the code for the 16f84 controller used in this cuircuit

Hello. I'm a student from Marseilles and I have to carry out a project about rfid in a charity running. So I want to know what is the best soultion between different frequencies and have some plans to realize the montage.

hi m a final yr be student and want to do a project on automated traffic control system using RFID ..can you plz send me the ckt diagram of the rfid tag,receiver...and hot the tag can be interfaced to the com port...and details abt the cost of each item

hello friends iam aMS student n i m searching a project in rfid in which more working is realated to embedded system plz halp me

We are final year B.Tech students working on RFID system to identify persons entering a lab we would like to have the Block dig & ckt of Reader,Tag & preferred antenna

we are doing a project in b.e. final year. we want to do r.f.i.d. for staff attendance please provide whole circuit diagram of r.f.i.d. reader, tags with anticollison system

We are final year B.Tech students working on RFID system to identify persons entering a lab we would like to have the Block dig & ckt of Reader,Tag & preferred antenna

i am doing project about burglar alarm system,i want to know how to make 125Khz RFID tags with anticollison system,and please provide me the circuit diagram of RFID reader.Thanks.

am doing final project,about identification of theft of vehicles in parking stand using rfid tag will u please provide circuit diagram and cost of approximation of this project

i am doing an project to study about how to reduce the collision in RFID reader. i need more about your opinion and detail that can help me to know more about the way to reduce and detect the collision of RFID reader. thanks

We are final year B.Tech students working on RFID system to identify persons entering a lab we would like to have the Block dig & ckt of Reader,Tag & preferred antenna

we are doing a project in b.e. final year. we want to do r.f.i.d. for staff attendance please provide whole circuit diagram of r.f.i.d. reader, tags with anticollison system

Hi, This is very good and useful.I want FSK demodulation design specification.Please,cosider the my reqiest. Let me know the result. I wait for your reply. With Regards & Thanks RAMA RAO.V Cell:98852 51781

What sort of power/energy requirements on the reader? What specifications of the battery? Only 9V dc mentioned.

please send me the cost details about rfid reader coil and anticollision rfid. i am interested in doing my final year B.E project on rfid. My project is to make the road traffic as closed loop, that is signals should be given depending upon the density of vehicles. For that i have to stick rfid tag in every vehicle and using anticollision rfid i have to track it in order to count it. so i request you to send me further more details about this project thank you.

we are trying to launch a electronic access control device in the Indian market . the device is an RF ID unit. the specs are as follows. the unit must perform the following functionalists 1. read\write RF ID tags. 2.display information about the holder of the card (name,date,time of entry,) 3.frequency range of tag should be 125 KHz 4.there must be connection of RS232 and RS485 5.capable of storing and displaying 500 employee names, 6. capable of storing 5000 transactions . LCD should be a 2 line LCD. a five key interface to select from a menu in the LCD(the keys must be up,down,left right and select) two outputs capable of driving 12v relays there must be three LEDs showing whether the card is valid,whether the device is ready to accept the card,power . there must be an option of adding new coding to the controller to be used. extension of memory should be possible. we need an entire circuit that should contains 8051, adc,dac,lcd,antenna, and noise filtering circuits.

awaiting for ur reply. sastaelese@yahoo.com

for streta systems and technologies

please send

pls send us the block diagram,complete circuit diagram of rfid unit with list of components that are avaliable in indian market.

Following are my further requirements. 1) Asm.code for pic. 2) complete ckt diagram (big& clear). 3) Componenets list(with prices). 4) any further relevant data needed development of 13.56mhz reader ckt. any help would be great. Awaiting your reply sunyboy_vijay@yahoo.co.nz

Please upload a clear figure of electronic circuitary. It is not readable! The PIC code is also not provided.

Is it possible to get the asm for pic? thanks

Identification is possible by a tag without a reader? Can a tag interface with a microcontroller? I need an identification (turn on an LED) on a tag itself. Is it possible? Please send me your suggetions. Thanks and regards.

yes Ahmad it is possible , with 100 % accuracy and 0 % man effort.just sit in front of an PC click an button and get your inventory count.You can also track movement of your goods as well ( live picture of goods located at which place ) you can get in touch with me if you solution for this at uppal.kumar@gmail.com

My company has thousands of assets using Barcode lables. Is it possible to use RFID reader for asset auditing or asset verification remotely?

Is it possible to develop, say, 150 tags assigned with the same frequency, located at 2 cm apart from each other, to be read out at a time? If so, what will be the reading rate of the receiver? Is it poissible to read the number of tags with the same frequency assignment?

All is okay but where is the firmware or the hex program of PIC 16F84?