Reprints     Printer-Friendly    Email this Article    RSS        Font Size     What's This?

[Ideas For Design]

An Inverter For Compact Fluorescent Lamps



Contributing Author  |   ED Online ID #6197  |   July 26, 1999

Article Rating:

The inverter circuit shown produces a low-voltage dc supply suitable for use with compact fluorescent lamps (CFLs). The main feature of this inverter is the inclusion of a pre-heating circuit, with high-voltage ignition and steady-state currentlimiting. The incorporation of a preheating feature helps to prevent blackening of the bulb, while improving both the efficiency and the voltage and currentwave shapes across the bulb. This, in turn, lengthens bulb life. The circuit is applicable to solar-powered lanterns, solar street-lighting systems, automobile interior lighting, and emergency lighting systems.

The inverter configuration is a selfoscillating push-pull arrangement. Transistor Q3, along with the relay (RLY), resistor R6, and capacitor C4, forms the preheating circuit with a preheat time of approximately 400 ms. The relay opens and C3 is connected across the bulb, which improves the shape of the voltage and current waveforms and the bulb’s power factor. Diode D1 and a fuse have been included to provide reverse-polarity protection.

This circuit has been built and tested using a 12-V dc input, resulting in a light output of 370 lumens when used with a 4-pin, 7-W compact fluorescent lamp. The circuit’s efficiency was measured at better than 75% with a switching frequency of approximately 25 kHz.

Component List

Transformer Details

See associated figure




Reprints     Printer-Friendly    Email this Article    RSS        Font Size     What's This?


  • In EDA, A Year Of Mergers, Failed And Otherwise
  • 2008 BEST Electronic Design Winners
  • Engineers Rely On Internet For Product Info
  • Rochester Electronics Establishes New Design and Technology Group
  • November 17, 2008
  • Custom Sources Light Way To 22-nm IC Lithography
  • Software Turns Scopes Into Vector RF Signal Analyzers
  • Couple’s $15 Million Gift Advances Rice Engineering Education
    1) Behind The Bright Lights, LED Drivers Evolve To Meet New Requirements
    (732 views today)
    2) Build A Smart Battery Charger Using A Single-Transistor Circuit
    (271 views today)
    3) Wi-Fi Chips Stand Out In A Sea Of Wireless Products
    (205 views today)
    4) What's All This "Adjustable Slew Rate Stuff," Anyhow?
    (187 views today)
    5) Ten Top Design Skills For Tough Times
    (184 views today)
    ALL TOP 20







    Reader Comments

    Very nice circuit, I personally would use a PWM chip of some kind, like a TL494. Then i'd put this in a inverter topology such as a full bridge.

    Definitely a worthwhile article.

    Anonymous -November 14, 2006

    thank u ,how can i use thise circuit to work with the ordinary flourocent lamp. please give me a full diagram for the cicuit of emergency flourocent (2 lamp) (with 12 v battary). execuse me thise is the first question in site. i hope u repplay soon.

    mostafa -January 18, 2006   (Article Rating: )

    Dear Sir, The circuit is very interesting,we manufacture solar lantern,home light,street light,led lights etc.We will try this ckt&give you the report. THANKS B.S.SRINIVASAN VIPROF ELECTRONICS BANGALORE-560100 FAC:080 28520791 MOB:9845020983

    B.S.Srinivasan -January 14, 2006   (Article Rating: )
    Read more comments...

    POST YOUR COMMENTS HERE

    Name:

    Email:
    Rate this article:

     less useful more useful 
    1
    2
    3
    4
    5
    Your Comments:

    Enter the text from the image below




    Please refresh the page if you have trouble reading this text.
     
     

    PartFinder

    Find real-time pricing, stock status, same-day/next-day shipping options and more. Brought to you by Digi-Key. Go to PartFinder.    
    GlobalSpec

    PART SEARCH :
    Powered by: GlobalSpec - The Engineering Search Engine
    Sponsored Links

    Electronic Design Europe Electronic Design China EEPN Power Electronics Auto Electronics Microwaves & RF
    Mobile Dev & Design Schematics Find Power Products Military Electronics EE Events Related Resources