In many linear applications of field-effect transistors, the FET is used as a constant-current device for large V_DS (i.e., drain-to-source voltage) or as ohmic resistance for small V_DS. In the region before pinch-off, the FET is effective as a voltage-variable resistor. When forward-biased, the transfer characteristic (V_GS vs. I_d) of this device exhibits a linear variation of r_DS(on), or drain-to-source on-resistance, with the junction temperature (T_j). This behavior indicates that a FET could be used as a temperaturesensing resistor (TSR) in the range of approximately −40°C to +150°C.

To use a FET as a temperature sensor in a practical application, a metallic cap preferably made with aluminum can be used as a heat sink (Fig. 1). The heat sink senses the temperature bath and provides linear variation of r_DS(on) with temperature. Increasing junction temperature causes a linear increase in drain-to-source on-resistance.

In general usage, junction temperature changes with the mode of operation and biasing configuration of the FET. But in this application, the biasing and FET operation are kept constant, varying the junction temperature via the heat sink by heating or cooling above or below room temperature. Compared to N-channel FETS, P-channel FETS produce a larger variation of r_DS(on) over temperature.

The plots given are for Motorola’s general-purpose N-channel FET 2N4856. Other families of FETs also exhibit a similar linear response of r_DS with respect to junction temperature.

See associated figure

Reprints

Printer-Friendly

Email this Article

RSS

Submit PlanetEE del.icio.us Digg Reddit Newsvine StumbleUpon Netscape Yahoo MyWeb Live Bookmarks Fark  Submit

Font Size

What's This?

1U High Supplies Deliver Up To 600W Programmable Power Supplies Expand Voltage Range Mobile WiMAX Host Tester Checks Protocol Stacks FireWire Chips Write Fast, Consume Less Power External AC/DC Supplies Meet CEC/EISA Standards Video Processing Mezzanine Card Basks In Harsh Environments

In EDA, A Year Of Mergers, Failed And Otherwise 2008 BEST Electronic Design Winners Engineers Rely On Internet For Product Info Rochester Electronics Establishes New Design and Technology Group November 17, 2008 Custom Sources Light Way To 22-nm IC Lithography Software Turns Scopes Into Vector RF Signal Analyzers Couple’s $15 Million Gift Advances Rice Engineering Education

1) Behind The Bright Lights, LED Drivers Evolve To Meet New Requirements (721 views today) 2) Build A Smart Battery Charger Using A Single-Transistor Circuit (270 views today) 3) Wi-Fi Chips Stand Out In A Sea Of Wireless Products (194 views today) 4) What's All This "Adjustable Slew Rate Stuff," Anyhow? (185 views today) 5) Ten Top Design Skills For Tough Times (184 views today) ALL TOP 20

Reader Comments right more use pradeep -May 15, 2008 Hello, I have a project and i want to measure the temperature of a liquid in the range ( 0 - 80) I found this site and it looks so useful but i have a small request. If you can tell me more about this heat sink and how to connect it to the circuit, and remember, it should sense the liquid's temperature. Thanks alot. Riyadh -May 16, 2007
POST YOUR COMMENTS HERE Name: Email:
Your Comments: Enter the text from the image below Please refresh the page if you have trouble reading this text.